01
Guide rail & helical rack
Precision linear guideways and a helical rack drive on both axes.
Flux-T6 Series — Flux T6 Series Sheet & Tube Fiber Laser Cutting Machine
1.5kW-12kW
3050 × 1530 mm / 4050 × 2030 mm / 6050 × 2530 mm
120 m/min
Enclosed sheet and tube fiber laser cutting machine with a tube loading axis, three bed sizes from 3050 × 1530 mm to 6050 × 2530 mm and fiber power from 1500W to 12000W.
Overview
Product overview
The Flux T6 Series is an enclosed sheet and tube fiber laser cutting machine with a tube loading axis, offered in three bed sizes: 3050 × 1530 mm, 4050 × 2030 mm and 6050 × 2530 mm. Fiber laser power runs from 1500W to 12000W, and every model uses the FSCUT control system with a 120 m/min maximum moving speed, 1.2G acceleration, 0.05 mm position accuracy and 0.03 mm reposition accuracy on the X and Y axes. The body is fully enclosed, so the cutting area is contained while the machine also processes round tubes, square tubes and similar profiles on the same bed.
Read more
On the sheet side the Flux T6 processes carbon steel, stainless steel, aluminum and brass. The tube loading axis adds round tubes, square tubes and comparable profiles, so the same machine cuts flat parts and cuts tube to length without a second tube-only machine on the floor.
- Carbon steel sheet
- Stainless steel sheet
- Aluminum sheet
- Brass sheet
- Round tubes and square tubes
The enclosed body is the practical difference between the Flux T6 and an open-bed machine: the cutting zone sits inside the cabinet, which suits workshops that want the process contained in a busy production hall. Send us the material mix, sheet thicknesses and tube sizes you run and we will confirm the configuration, the assist gas setup and the cutting parameters.
- 3050 × 1530 mm Yes
- 4050 × 2030 mm Yes
- 6050 × 2530 mm Yes
Key features
What you get on every machine
Six production-proven parts — slide through the components that carry the cut.
6 components · drag or use the arrows
02
AC servo motors
1.2G acceleration, 0.05 mm positioning and 0.03 mm repeat accuracy.
03
Fiber laser source
1500W to 12000W, chosen independently of the bed size.
04
Cutting head
Protective lens and follow-up system, matched to the assist gas.
05
Air compressor
Shop air feeds the assist-gas line for carbon steel cutting.
06
Voltage stabilizer
Keeps the 380V supply steady for the source and CNC.
Specifications
Technical Parameters
| Model | Flux-T6 Series | Laser Power | 1.5kW-12kW |
|---|---|---|---|
| Working Area | 3050 × 1530 mm / 4050 × 2030 mm / 6050 × 2530 mm | Positioning Accuracy | 0.05 mm |
| Repeat Accuracy | 0.03 mm | Control System | FSCUT |
| Cooling | Water | Voltage | 380V 50/60Hz |
| Tube Cutting | Supported |
Cutting samples
What the Flux-T6 Series cuts
Four materials in one row — every sample cut on this machine.
-
Carbon steel
Bracket with holes and cut-outs
-
Stainless steel
Plate with slots and fine contours
-
Aluminum
Stacked mounting plates
-
Brass
Keyhole component with curved outline
Related Products
You May Also Like
FAQ
Frequently Asked Questions
Which models are in the Flux T6 series and what are their bed sizes?
The series offers three bed sizes: 3050 × 1530 mm, 4050 × 2030 mm and 6050 × 2530 mm. All three formats cut sheet and tube with fiber power from 1500W to 12000W.
What does the enclosed body change in practice?
The Flux T6 keeps the cutting zone inside the machine cabinet instead of on an open bed, and the tube loading axis works inside the same enclosure.
How fast and how accurate is the Flux T6?
Maximum moving speed is 120 m/min with 1.2G acceleration. Position accuracy on the X and Y axes is 0.05 mm and reposition accuracy is 0.03 mm.
What control system and power supply does the Flux T6 use?
It uses the FSCUT control system and requires a 380V 50/60Hz power supply. Automatic feeding is available as an option.
How much does a Flux T6 cost?
Price depends on the bed size, the laser power you choose and options such as automatic feeding. Send us your sheet sizes, materials and tube profiles and we will prepare a full quotation.
Reviews
What Customers Say
-
We run this machine two shifts a day on stainless and carbon steel. Piercing speed and the auto-focus head cut our setup time noticeably.
-
Delivery was on schedule and the sea-worthy packing arrived intact. Cutting quality on 3 mm stainless is clean enough to skip secondary finishing.
-
The exchange table keeps cutting while we load the next sheet, so output per shift went up without adding operators.
-
Support replied in Portuguese during commissioning. The 3 kW source has plenty of headroom for our 6 mm aluminum parts.
Request a quotation
Need a quotation in 24 hours?
Send us your material, thickness and size — we reply with the right model, parameters and FOB price.
- Free sample cutting on your own material
- Reply in English, Spanish, Portuguese or Russian
