01
Guide rail & helical rack
Precision linear guideways and a helical rack drive on both axes.
Flux-S Series — Flux-S Series Enclosed Fiber Laser Cutting Machine
1.5kW-12kW
3050 × 1530 mm / 1330 × 2550 mm
120 m/min
Flux-S fully enclosed fiber laser cutting machines, 1500W-12000W, with 3050 × 1530 mm or 1330 × 2550 mm beds, inspection window and XC3000Plus / FSCUT control.
Overview
Product overview
The Flux-S is a 1500W-12000W fiber laser cutting machine with a 3050 × 1530 mm working area and a fully enclosed body. Unlike an open-bed cutter, the Flux-S keeps the whole cutting area inside the cabinet, with a large inspection window so the operator can watch the cut without opening the door. A second format is offered on the same platform: a 1330 × 2550 mm bed, a narrow, long layout for workshops with limited floor width. Both models run the XC3000Plus / FSCUT CNC package on a 380V 50/60Hz supply.
Read more
The series is specified for carbon steel, stainless steel, aluminum and brass, matching the manufacturer's sample set. It cuts flat sheet; the enclosure keeps the working area dark and holds the process inside the cabinet rather than spreading it across the shop floor. Laser power is ordered between 1500W and 12000W, and the thickness a machine reaches depends on the source fitted, the assist gas and the edge quality required, so the power option is confirmed against your parts before the order.
- 3050 × 1530 mm Standard enclosed format, full-size sheet with the doors closed
- 1330 × 2550 mm Narrow long bed for shops where floor width is the constraint
Key features
What you get on every machine
Six production-proven parts — slide through the components that carry the cut.
6 components · drag or use the arrows
02
AC servo motors
1.2G acceleration, 0.05 mm positioning and 0.03 mm repeat accuracy.
03
Fiber laser source
1500W to 12000W, chosen independently of the bed size.
04
Cutting head
Protective lens and follow-up system, matched to the assist gas.
05
Air compressor
Shop air feeds the assist-gas line for carbon steel cutting.
06
Voltage stabilizer
Keeps the 380V supply steady for the source and CNC.
Specifications
Technical Parameters
| Model | Flux-S Series | Laser Power | 1.5kW-12kW |
|---|---|---|---|
| Working Area | 3050 × 1530 mm / 1330 × 2550 mm | Positioning Accuracy | 0.05 mm |
| Repeat Accuracy | 0.03 mm | Control System | XC3000Plus / FSCUT |
| Cooling | Water | Voltage | 380V 50/60Hz |
Cutting samples
What the Flux-S Series cuts
Four materials in one row — every sample cut on this machine.
-
Carbon steel
Bracket with holes and cut-outs
-
Stainless steel
Plate with slots and fine contours
-
Aluminum
Stacked mounting plates
-
Brass
Keyhole component with curved outline
Related Products
You May Also Like
FAQ
Frequently Asked Questions
What does the enclosure change for the operator?
The cutting area stays inside the cabinet and is monitored through a large inspection window instead of from an open bed. Traverse speed, 1.2G acceleration and 0.05 mm position accuracy are unchanged.
Which bed size should I choose?
3050 × 1530 mm for standard full sheets, or 1330 × 2550 mm, a narrow long bed for shops with limited floor width. Both accept 1500W-12000W power options.
Which materials does the Flux-S cut?
Carbon steel, stainless steel, aluminum and brass, as listed in the manufacturer's sample set. Tube and profile cutting is covered by the tube cutting series.
What control system is fitted?
XC3000Plus / FSCUT CNC control with a 380V 50/60Hz power supply requirement and water cooling for the fiber source.
How much power can I order?
From 1500W to 12000W; the figure is sized against the material and thickness you cut and the edge quality you require.
Reviews
What Customers Say
-
We run this machine two shifts a day on stainless and carbon steel. Piercing speed and the auto-focus head cut our setup time noticeably.
-
Delivery was on schedule and the sea-worthy packing arrived intact. Cutting quality on 3 mm stainless is clean enough to skip secondary finishing.
-
The exchange table keeps cutting while we load the next sheet, so output per shift went up without adding operators.
-
Support replied in Portuguese during commissioning. The 3 kW source has plenty of headroom for our 6 mm aluminum parts.
Request a quotation
Need a quotation in 24 hours?
Send us your material, thickness and size — we reply with the right model, parameters and FOB price.
- Free sample cutting on your own material
- Reply in English, Spanish, Portuguese or Russian
